User Manual of PanoVu Series Network Camera
Figure 7-15 Modify an IP
(3) Click OK to finish modifying.
Delete an IP Address
Left-click an IP address from filter list and click Delete.
Delete all IP Addresses
Click Clear to delete all the IP addresses.
5. Click Save to save the settings.
7.3.3 Configuring Security Service Settings
Steps:
1. Enter the Security Service interface:
Configuration> System > Security > Security Service
2. Check the Enable SSH checkbox to enable the SSH function.
Enable SSH: Enabling SSH (Secure Shell) function is to encrypt and compress the data and to
reduce the transmission time.
7.4 User Management
Enter the User Management interface:
Configuration > System > User Management
The admin user has access to create, edit or delete other accounts. Up to 31 user accounts can be
created.
Figure 7-16 User Information
To Next Page
Loading...
Need help?
General
