HIKVISION DS-3E1106HP-EI User Manual

Chapter 4 Power on the Device
Please use the aached power cord in package to power on the device.
Before powering your switch, make sure that:
• The
operang power supply is compliant with rated input standard.
• Port cables and grounding cables are correctly connected.
• If there is outdoor cabling, connect a lightning rod and lightening arrester to the cable.
Cauon
PoE power supply line and strong wire cannot be wired together, otherwise PD equipment or
switch ports will be burnt.
100 Mbps Hi-PoE Switch Quick Start Guide
7

HIKVISION DS-3E1106HP-EI Specifications

General

Brand	HIKVISION
Model	DS-3E1106HP-EI
Category	Switch
Language	English