Installation Manual of DS-3E2300P Series Ethernet Switch
[选取日期]
- 15 -
When the cover is opened, put it aside. The main board of the system appears.
After taking off the cover, put it horizontally and avoid it to be crushed or collided. Otherwise, the
chassis is hard to install.
4.2 Closing the Chassis
Step 1 Align the equipment cover and its bottom, and push it in according to the direction of the
arrows. Do not push it in before aligning.
Step 2 Nail the bolt and screw it tightly with the screwdriver.
Step 3 Reinstall the switch on the DIN rail or on the desk.
Step 4 Reconnect all cables of the switch.
To Next Page
Loading...
Need help?
General