User Manual of DS-7100HWI/HVI-SL Series DVR
110
Figure 9.6 Configure Record Quota
4. You can copy the quota settings of the current camera to other cameras if required. Click the Copy button
to enter the Copy Camera menu, as shown below.
Figure 9.7 Copy Settings to Other Camera(s)
5. Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of
Analog to select all cameras.
6. Click the OK button to finish the Copy settings and back to the Storage Mode interface.
7. Click the Apply button to apply the settings.
Note: If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for recording.
To Next Page
Loading...
