User Manual of DS-7100HWI/HVI-SL Series DVR
26
sharpness level and 0~5 for the denoising level.
4. Copy image parameters.
1) If you want to copy the image parameters of the current camera to other camera (s), click the Copy
button to enter the Copy to interface:
Figure 3.7 Copy Image Settings to Other Camera (s)
2) Select the camera (s) to be configured with the image settings. You can also click the checkbox of
Analog to select all cameras.
3) Click the OK button to finish the Copy settings.
Note: You can click the Restore button to restore the current image settings to default parameters.
To Next Page
Loading...
Need help?
General