Network Video Recorder User Manual
x
● To prevent injury, this device must be securely attached to the installation surface in
accordance with the installation instructions.
●
●
Under high working temperature (40
°
C (104
°
F) to 55
°
C (131
°
F)), the power of some
power adapters may decrease.
Make sure that the power has been disconnected before you
wire, install, or disassemble the device.
● If the device needs to be wired by yourself, select the corresponding wire to supply power
according to the electric parameters labeled on the device. Strip off wire with a standard wire
stripper at corresponding position. To avoid serious consequences, the length of stripped wire
shall be appropriate, and conductors shall not be exposed.
● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
To Next Page
Loading...
