Digital Video Recorder User Manual
29
Table 1-5 Description of Front Panel
Turns red when a sensor alarm is detected.
Turns blue, indicating that the DVR is functioning
properly.
Turns blue when device is controlled by an IR
remote.
Turns red when controlled by a keyboard and
purple when IR remote and keyboard is used at the
same time.
Flickers in red when data is being read from or
written to HDD.
Flickers in blue when network connection is
functioning properly.
Turns blue when the device is in armed status; at
this time, an alarm is enabled when an event is
detected.
Turns off when the device is unarmed. The
arm/disarm status can be changed by pressing and
holding on the ESC button for more than 3 seconds
in live view mode.
Switches to the corresponding channel in live view
or PTZ control mode.
Inputs numbers and characters in edit mode.
Switches between different channels in playback
mode.
Turns blue when the corresponding channel is
recording; turns red when the channel is in network
transmission status; turns pink when the channel is
recording and transmitting.
To Next Page
Loading...
Need help?
General