Digital Video Recorder Quick Start Guide
11
Network Settings
Configure Hik-Connect
Hik-Connect provides mobile phone application and platform service to access and manage your connected
devices, which enables you to get a convenient remote access to the surveillance system.
Go to System > Network > Advanced > Platform Access.
Check Enable to activate the function. Then the service terms will pop up.
Enter the verification code in Verification Code.
Scan the QR code to read the service terms and privacy statement.
Check The Hik-Connect service will require internet access. Please read Service Terms and Privacy
Statement before enabling the service if you agree the service terms and privacy statement.
Click OK to save the settings.
Hik-Connect is disabled by default.
The verification code is empty by default. It must contain 6 to 12 letters or numbers, and it is case
sensitive.
(Optional) Check Custom to enter the server address as your desire.
(Optional) Check Enable Stream Encryption, verification code is required for remote access and live
view.
Click Apply.
What to do next:
After configuration, you can access and manage your devices through Hik-Connect app or website.
Configure Signal Input
For certain models, you can configure the analog and IP signal input types and enable 5 MP long distance
transmission.
Go to Camera > Camera > Analog.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
