HIKVISION DS-7108NI-Q1/8P/M

6.5.4 Congure Storage Mode
Congure HDD Groups
Mulple HDDs can be managed in groups. Video from specied channels can be recorded onto a
parcular HDD group through HDD sengs.
Steps
1. Go to Conguraon → Record → Storage Mode .
2. Select Mode as Group.
3. Select a group number.
4. Select IP cameras to record on the HDD group.
Figure 6-27 Group
5. Click Apply.
6. Restart the video recorder to acvate the new storage mode sengs.
7. Aer restart, go to Conguraon → Record → Storage .
8. Click of desired HDD to set the group.
9. Select a group number for the current HDD.
10. Click OK.
Note
Regroup the cameras for HDD if the HDD group number is changed.
Congure HDD Quota
Each camera can be congured with an allocated quota for storing videos.
Steps
1. Go to
Conguraon → Record → Storage Mode .
2. Set Mode as Quota.
3. Select a camera to set quota in Camera.
4. Enter the storage capacity in Record Capacity.
Network Video Recorder User Manual
68