HIKVISION DS-7204HUHI-K1 User Manual

Digital Video Recorder User Manual
10
before enabling the service. You should create a verification code to connect to the
Hik-Connect;
 TCP, UDP and RTP for unicast;
 Auto/Manual port mapping by UPnPTM;
 Remote search, playback, download, locking and unlocking the record files, and downloading
files broken transfer resume;
 Remote parameters setup; remote import/export of device parameters;
 Remote viewing of the device status, system logs and alarm status;
 Remote keyboard operation;
 Remote HDD formatting and program upgrading;
 Remote system restart and shutdown;
 Supports upgrading via remote FTP server;
 RS-485 transparent channel transmission;
 Alarm and exception information can be sent to the remote host;
 Remotely start/stop recording;
 Remotely start/stop alarm output;
 Remote PTZ control;
 Two-way audio and voice broadcasting;
 Output bandwidth limit configurable;
 Embedded WEB server;
 If DHCP is enabled, you can enable DNS DHCP or disable it and edit the Preferred DNS Server
and Alternate DNS Server.
Development Scalability
 SDK for Windows and Linux system;
 Source code of application software for demo;
 Development support and training for application system.

HIKVISION DS-7204HUHI-K1 Specifications

General

Video Input	4 channels
Video Output	1 HDMI, 1 VGA
Video Bitrate	32 Kbps to 6 Mbps
Audio Bitrate	64 Kbps
Dual Stream	Yes
Stream Type	Video, Video & Audio
Synchronous Playback	4-ch
SATA	1 SATA interface
HDD Capacity	Up to 10 TB capacity for each disk
Network Interface	1, RJ45 10M/100M self-adaptive Ethernet interface
Power Supply	12 VDC
Operating Humidity	10% to 90%
Max Resolution	1080p
Video Compression	H.264+
Audio Output	1-ch RCA (Linear, 1 KΩ)
Two-Way Audio	1-ch, RCA (2.0 Vp-p, 1 KΩ)
HDMI Output	1
VGA Output	1
Recording Resolution	1080p
Playback Resolution	1080p
Network Protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, UPnP™, HTTPS
USB Interface	2 USB 2.0
Operating Temperature	-10 °C to +55 °C