HIKVISION DS-7204HUHI-K1 User Manual

Digital Video Recorder User Manual
167
Figure 12-5 Hik-Connect Settings Interface
Step 5 Click Apply to save the settings.
After configuration, you can access and manage the DVR by your mobile phone on which
the Hik-Connect application is installed or by the website (www.hik-connect.com).
Please refer to the help file on the official website (www.hik-connect.com) and the Hik-Connect
Mobile Client User Manual for adding the device to Hik-Connect and more operation instructions.
12.2.3 Configuring DDNS
Purpose
If your DVR is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS)
to be used for network access.
Prior registration with your ISP is required before configuring the system to use DDNS.
Step 1 Go to Menu > Configuration > Network > DDNS.
Step 2 Check the Enable DDNS checkbox to enable this feature.
Step 3 Select DDNS Type. Three different DDNS types are selectable: DynDNS, PeanutHull, and
NO-IP.
 DynDNS:
1) Enter Server Address for DynDNS (i.e. members.dyndns.org).
2) In the Device Domain Name text field, enter the domain obtained from the DynDNS
website.
3) Enter the User Name and Password registered in the DynDNS website.

HIKVISION DS-7204HUHI-K1 Specifications

General

Video Input	4 channels
Video Output	1 HDMI, 1 VGA
Video Bitrate	32 Kbps to 6 Mbps
Audio Bitrate	64 Kbps
Dual Stream	Yes
Stream Type	Video, Video & Audio
Synchronous Playback	4-ch
SATA	1 SATA interface
HDD Capacity	Up to 10 TB capacity for each disk
Network Interface	1, RJ45 10M/100M self-adaptive Ethernet interface
Power Supply	12 VDC
Operating Humidity	10% to 90%
Max Resolution	1080p
Video Compression	H.264+
Audio Output	1-ch RCA (Linear, 1 KΩ)
Two-Way Audio	1-ch, RCA (2.0 Vp-p, 1 KΩ)
HDMI Output	1
VGA Output	1
Recording Resolution	1080p
Playback Resolution	1080p
Network Protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, UPnP™, HTTPS
USB Interface	2 USB 2.0
Operating Temperature	-10 °C to +55 °C