Network Video Recorder Quick Start Guide
17
HDMI video output connector.
Connector for alarm input.
Connector for alarm output.
1 10/100/1000 Mbps self-adaptive Ethernet
interface
Universal Serial Bus (USB 3.0) ports for additional
devices such as USB mouse and USB Hard Disk Drive
(HDD).
Ground (needs to be connected when NVR starts
up).
12 VDC power supply for DS-7600NI-I4 and
DS-7600NI-K4, and 100 to 240 VAC for
DS-7600NI-I4/P and DS-7600NI-K4/P.
Switch for turning on/off the device.
Network Interfaces
with PoE function
(supported by
DS-7600NI-I2/P)
Network interfaces for the cameras and to provide
power over Ethernet.