HIKVISION DS-7600NXI-K1/P Series User Manual

Figure 5-7 Moon Detecon
2.
Select a camera.
3.
Turn on Enable.
4.
Set VCA Mode as By NVR or By Camera.
By NVR
The
moon detecon event will be analyzed by NVR. The device can analyze videos that
contain human and vehicle. Only the target of selected type (human or vehicle) will trigger
alarms, which can reduce false alarms that are caused by other objects.
By Camera
The
moon detecon event will be analyzed by camera.
5.
Set the
moon detecon area.
-
Click Draw Area or Clear to draw or clear areas. The
rst area is set as full screen by default.
-
Click Full Screen to set the
moon detecon area as full screen. You can drag on the preview
window to draw
moon detecon areas.
6.
Adjust Sensivity. Sensivity allows you to calibrate how easily movement could trigger the
alarm. A higher value results in the more readily to triggers
moon detecon.
7.
Oponal: Set Target Detecon as Human or Vehicle to discard alarms which are not triggered
by human or vehicle.
Note
When VCA Mode is set as By NVR, the human/vehicle target detecon is conicted with 4K/2K
output resoluon, please lower the resoluon.
8.
Set the arming schedule. Refer to Congure Arming Schedule for details.
9.
Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
10.
Click Apply.
Network Video Recorder User Manual
28

HIKVISION DS-7600NXI-K1/P Series Specifications

General

Brand	HIKVISION
Model	DS-7600NXI-K1/P Series
Category	Network Hardware
Language	English