Network Video Recorder User Manual
66
Figure 6-27 Face Capture
2. Select Camera.
3. Turn on Enable.
4. Adjust Sensitivity.
Sensitivity
The higher the value is, the more easily the defocus image can trigger the alarm.
5. Set the arming schedule. Refer to Configure Arming Schedule for details.
6. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
7. Click Apply.
Face Picture Comparison
Face picture comparison compares the detected face pictures with face pictures in the face picture
library. The device will trigger an alarm when comparison succeeded.
Before You Start
Ensure you have created at least one face picture library, and face pictures are added to the
library. Refer to Face Picture Library Management for operation details.
Steps
1. Go to Configuration → Facial Recognition → Face Picture Comparison.
To Next Page
Loading...
Need help?
General
