HIKVISION DS-7604NXI-K1/4P - Add Network Disk; 5.6.2 Configure Recording Schedule; Configure Continuous Recording

Add Network Disk
You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.
Steps
1.
Go to Conguraon → Record → Storage .
2.
Click Add.
3.
Select NetHDD.
4.
Set Type as NAS or IP SAN.
5.
Enter NetHDD IP address.
6.
Click
to search the available disks.
Figure 5-9 Add NetHDD
7.
Select NAS disk from the list, or manually enter the directory in NetHDD Directory.
8.
Click OK. The added NetHDD will be displayed in the storage device list.
5.6.2
Congure Recording Schedule
Video recorder will automacally start/stop recording according to the congured schedule.
Congure
Connuous Recording
Steps
1.
Go to Conguraon → Record → Parameter .
Network Video Recorder User Manual
35