Need help?Do you have a question about the HIKVISION DS-7804NXI-K1/4P and is the answer not in the manual?
General| Brand | HIKVISION |
|---|---|
| Model | DS-7804NXI-K1/4P |
| Category | Network Hardware |
| Language | English |
Guides users through activating the NVR device using various methods like local menu, SADP, client software, or web browser.
Explains the necessary TCP/IP configuration for network operation of the NVR.
Initiate and manage the live video feed from connected cameras.
Operate Pan, Tilt, and Zoom (PTZ) functions for compatible cameras.
Configure video recording parameters, schedules, and types.
Set main and sub-stream video parameters like resolution and frame rate.
Define schedules for continuous, event, motion, or alarm-triggered recording.
Access and review recorded video files.
Perform operations during playback, such as editing clips or adjusting speed.
Configure basic event alarms like motion, video loss, and tampering.
Set up motion detection rules, areas, sensitivity, and linkage actions.
Configure advanced video content analysis (VCA) events for smart detection.
Set schedules for when event detection and linkage actions are active.
Define actions to be triggered when an alarm or event occurs.
Configure VCA type for each engine as its working mode.
Compare detected faces with stored pictures for recognition and alarm.
Configure perimeter protection features like line crossing and intrusion detection.
Detect and capture human bodies appearing in the monitoring scene.
Detect vehicles and capture license plates for traffic monitoring.
Manage Solid State Drive (SSD) including initialization and S.M.A.R.T. detection.
Manage local Hard Disk Drives, including grouping and property settings.
Manage user accounts, including adding, editing, and assigning permissions.
Recover or reset the admin password using GUID, security questions, or Hik-Connect.
Configure general device settings like language, resolution, and device name.
To Next Page