Need help?Do you have a question about the HIKVISION DS-8116HQHI-F8/N and is the answer not in the manual?
Describes local display options including HDMI/VGA output and screen layouts.
Covers HDD setup, capacity, network disk connections, and storage modes.
Details recording types, schedules, motion detection, and playback functions.
Details network interface settings, protocols, and remote access features.
Describes the front panel layout and indicators of the DVR.
Explains how to operate the DVR using the included IR remote control.
Details how to use a USB mouse for DVR control and navigation.
Describes the rear panel layout and connectivity ports of the DVR.
Provides steps for safely powering on and off the DVR.
Guides on setting an admin password for initial device access.
Details on using an unlock pattern for device login and security.
Walkthrough of initial device setup including language and network settings.
Procedures for adding, activating, and managing IP cameras.
Steps for logging into and out of the DVR system.
How to reset the admin password using a GUID file.
Guides on adding and connecting IP cameras to the DVR.
Explains the live view interface and its icons.
Details available functions and controls within the Live View interface.
Describes mouse controls for navigation and interaction in Live View.
Instructions for switching between main and auxiliary video outputs.
Customizes live view output, dwell time, audio, and screen number.
Manually diagnoses video quality of analog channels and views results.
Guides on setting up Pan, Tilt, and Zoom parameters for PTZ cameras.
Instructions for setting and managing PTZ camera presets, patrols, and patterns.
Steps to set specific PTZ camera positions for event triggers.
Configures PTZ movement between key points with set durations.
Records and sets PTZ movement paths for automated control.
Provides access to the PTZ control interface for camera movement.
Sets video compression, resolution, bitrate, and stream type for recording.
Sets automatic start/stop times for recording and capture based on schedule.
Sets up motion detection parameters and triggers for recording and alarms.
Configures recording and capture triggered by alarm inputs.
Sets up recording and capture triggered by events like VCA alarms.
Enables manual recording and continuous capture, overriding scheduled recording.
Sets up separate recording or capture schedules for holidays.
Enables saving records to both primary and redundant HDDs for data safety.
Manages HDDs in groups for recording specified channels.
Enables or disables H.264+ compression for analog cameras with one click.
Enables 1080P Lite mode for real-time encoding resolution support.
Instructions for searching and playing back recorded video files.
Quickly plays back recorded video files from the last five minutes.
Searches and plays back record files by camera, time, and type.
Searches and plays back files based on event types like motion or alarm.
Analyzes video for motion or VCA events and plays relevant footage.
Procedures for backing up video and picture files to external devices.
Backs up files found via normal video or picture search.
Backs up event-related record files found through event search.
Configures motion detection areas, sensitivity, and alarm actions.
Sets up handling methods for external sensor alarms.
Configures IP address, gateway, DNS, and working modes.
Enables mobile and web platform access to the DVR for remote management.
Guides on setting up RAID levels for disk redundancy and performance.
Steps to initialize a new hard disk drive before use.
To Next Page
General