HIKVISION DS-8632NI-I8/24P User Manual

Network Video Recorder User Manual
26
– To import a configuration file, select the file from the selected backup device and click
Import.
Note
After the importing process is completed, you must reboot the device to activate the settings.
2.9 Save Camera VCA Data
After saving camera VCA data to your device, you will be able to search the camera VCA data.
Go to Storage → Advanced to enable Save VCA Data via local GUI interface.
Go to Configuration → Video and Audio → Display Info. on Scream to turn on Enable Dual-VCA
via web browser.
2.10 Upgrade IP Cameras
The IP camera can be upgraded through the device.
Steps
1. Go to Camera → Camera → IP Camera → More Settings → Upgrade.
Figure 2-4 Upgrade IP Cameras
2. Select a method to upgrade your camera.
Online Upgrade
Click Online Upgrade, and click Check for Updates or Quick Upgrade
to upgrade your cameras.
Note
Your device shall be properly connected to Hik-Connect.

HIKVISION DS-8632NI-I8/24P Specifications

General

Model	DS-8632NI-I8/24P
Category	Network Hardware
Video Input Channels	32
Max Incoming Bandwidth	320 Mbps
Max Outgoing Bandwidth	160 Mbps
Video Compression	H.265+/H.265/H.264+/H.264
HDMI Output Resolution	4K (3840 × 2160)
VGA Output Resolution	1920 × 1080
Two-way Audio	Yes
Decoding Format	H.265/H.264
Synchronous Playback	16 channels
HDD Slots	8
SATA	8 SATA interfaces
USB Interface	2 × USB 2.0, 1 × USB 3.0
Alarm In/Out	16/4
PoE Ports	24
PoE Standard	IEEE 802.3af/at
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
Max. Resolution	12MP
Audio Input	1 channel, RCA
Audio Output	1 channel (RCA)
Recording Resolution	6MP/5MP/4MP/3MP/1080P/720P
Storage Capacity	Up to 10 TB capacity for each HDD
Network Interface	1 × 10/100/1000Mbps Ethernet
PoE Interface	24 × RJ45 10/100 Mbps
Power Supply	100 to 240 VAC, 50 to 60 Hz
Weight (without HDD)	≤ 8 kg
Video Output	2 × HDMI, 1 × VGA