Network Video Recorder User Manual
25
Chapter 3 Live View
Live view displays the video image getting from each camera in real time.
3.1 Start Live View
Click on the main menu bar.
● Select a window and double click a camera from the channel list to play the live image of the
camera.
● Double click a window to view it in single-screen mode. Double click again to exit single-screen
mode.
● Use the toolbar at the playing window bottom to realize the capture, instant playback, audio
on/off, digital zoom, live view strategy, show information and start/stop recording, etc.
Note
Click at the lower right corner to stop all-day continuous recordings.
● Click to start/stop auto-switch. The screen will automatically switch to the next one.
● Single click to enable VCA information display. Double click to disable VCA information
display.
Note
Click at the lower right corner to enable/disable VCA information display for all channels.
VCA information of 16 channels (maximum) is available.
● Move the cursor to a window, and right click your mouse to display the shortcut menu of the
window. The shortcut menu will be different according to the window.
Figure 3-1 Shortcut Menu
To Next Page
Loading...
