Network Video Recorder User Manual
28
Configure Live View Mode
Steps
1. Go to System → Live View → View.
2. Select the video output interface.
3. Select a layout or custom layout from the toolbar.
4. Select a division window, and double-click on a camera in the list to link the camera to the
window.
Note
● You can also click-and-drag the camera to the desired window on the Live View interface to
set the camera order.
● You can enter the number in the text field to quickly search the camera from the list.
5. Click Apply.
6. Optional: Click to start live view for all channels, or click to stop all live view channels.
3.1.3 Switch Main/Auxiliary Port
Only the image displaying at the main port can enter main menu and achieve device operation.
You can click in Live View mode, or go to System → Live View → General to switch the
main/auxiliary port
If your device has 2 HDMI interfaces and 2 VGA interfaces. HDMI1 and VGA1 are the main ports,
and videos output are provided simultaneously. HDMI2 and VGA2 are auxiliary ports, and videos
output are provided simultaneously.
3.2 Digital Zoom
Digital Zoom zooms into the live image in different magnifications (1x to 16x).
Steps
1. Start live view.
2. Click from the toolbar.
3. Move the sliding bar or scroll the mouse wheel to zoom in/out the image to different
magnifications (1x to 16x).
To Next Page
Loading...
