HIKVISION DS-9600NI-I8B Series - PTZ Control; Configure PTZ Parameters

Network Video Recorder User Manual
31
Figure 3-5 Channel-Zero Encoding
3. Configure Frame Rate, Max. Bitrate Mode, and Max. Bitrate.
Note
The higher frame rate and bitrate require the higher bandwidth.
4. Click Apply.
You can view all the channels on one screen via CMS or web browser.
3.6 PTZ Control
3.6.1 Configure PTZ Parameters
Follow these procedures to set the PTZ parameters. The PTZ parameters configuration must be
done before you can control the PTZ camera.
Steps
1. Click on the quick settings toolbar of the PTZ camera.
2. Click PTZ Parameters Settings to set the PTZ parameters.