HIKVISION DS-AT1000S Series - Page 21

DS-AT1000S Series Storage System Quick Start Guide
20
Figure 4-1 Modify Network
Step 2 You can view binding network information and modify binding parameters.
Figure 4-2 Modify Network
 DS-AT1000S/360, DS-AT1000S/440, and DS-AT1000S/480 series storage system contains 5
network interfaces. By default, network interface 1 and 4 are bonded as a data network
interface (bond network interface 1) and bonding mode is XOR.
 DS-AT1000S/160, DS-AT1000S/240, DS-AT1000S/300, and DS-AT1000S/320 series storage
system contains 4 network interfaces. By default, network interface 1 and 3 are bonded as a
data network interface (bond network interface 1) and bonding mode is XOR. Network
interface 4 is management network interface.
 Configure static link aggregation and disable LACP for the network switch