Need help?Do you have a question about the HIKVISION DS-81 Series and is the answer not in the manual?
Lists trademarks and their owners.
Outlines terms of use, warranties, and liability limitations for the product.
Explains FCC compliance for digital devices and operational conditions.
States compliance with EU directives for product safety and environmental standards.
Confirms compliance with Industry Canada standards for digital devices.
Highlights critical safeguards to prevent serious injury or death.
Outlines precautions to prevent potential injury or material damage.
Describes the purpose and features of the storage system.
Step-by-step guide for installing Hard Disk Drives into the system.
Instructions on how to access the storage system via a web browser.
Procedures for logging into the storage system interface.
System interface for reboot, shutdown, and viewing login/iSCSI information.
Monitoring real-time system performance graphs and data.
Viewing system version, resetting, logs, and system upgrades.
Visualizing front view status and storage information through charts.
Information on fan speed, module temperature, and chassis power.
Viewing HDD information, location, supplier, model, size, status, and group.
Creating and managing RAID arrays, including hot spares and array exceptions.
Managing storage pools, which are made of physical volumes, arrays, and HDDs.
Creating and managing virtual HDDs (LUNs) using physical HDDs.
Setting array synchronization speed and flickering time for HDD positioning.
Adding and managing iSCSI HDDs, including CHAP user configuration.
Enabling and disabling Fibre Channel (FC) service for connecting FC HDDs.
Quick setup for creating HYBRID SAN, storage pools, and volumes.
Configuring HYBRID SAN settings, including private volumes and service startup.
Deleting HYBRID SAN videos, encoders, and configurations by resetting the system.
Creating, clearing, modifying, and deleting logical volumes that store videos.
Managing video backup and HYBRID SAN restoring operations.
Configuring backup HYBRID SAN and master HYBRID SAN for redundancy.
Steps to access the HYBRID SAN sub-system via a web browser.
Viewing information about encoding devices, schedules, and volumes.
Adding, managing, modifying, and deleting encoding devices.
Manual control for starting and stopping recording of encoding devices.
Configuring recording schedules and alarm parameters.
Searching, locking, playing, and downloading recorded videos.
Configuring management and data network interfaces, bonding, and routing.
Setting up email and SNMP notifications for system alarms.
Adjusting and synchronizing system time with time servers.
Downloading system logs to a local HDD for analysis.
Recording, searching, and clearing operational events and their timestamps.
Recording system performance metrics like CPU usage and network traffic.
Recording details of system software updates and their status.
To Next Page
General
