HIKVISION DS-81 Series - Creating Logical Volume; Deleting Logical Volume; Renaming Logical Volume

Storage System User Manual
34
4.4.1 Creating Logical Volume
Purpose:
You can create logical volumes by using available physical volumes.
Steps:
1. Click Create.
Figure 4. 15 Create Logical Volume
2. Enter Name.
3. Enter Capacity (MB).
4. Select Block Size (Byte) from dropdown list.
5. Choose Available Physical Volume.
6. Click OK to create logical volume. Created logical volume is listed in logical volume information list.
4.4.2 Deleting Logical Volume
Steps:
1. Select the logical volume you want to delete.
2. Click button to delete them.
The working logical volume can be deleted. Only free logical volume can be deleted.
4.4.3 Renaming Logical Volume
You can only rename the free logical volumes.
Steps: