Storage System User Manual
9
2.1 HDD Installation
In the event of device appearance shown in following steps conflicts with real device, the later prevails.
Before you start:
Prepare the following equipment and accessories.
A storage system
Hard HDDs
A pair of anti-static gloves
A screwdriver
Steps:
1. Press the blue button. Then the handle pops up.
Figure 2. 2 Press the Blue Button
2. Hold the hander and pull the HDD dummy out of the slot.
Figure 2. 3 Pull out the HDD Dummy
3. Use the screwdriver to uninstall the baffle in the bottom of HDD slot.
4. Place an HDD in the HDD dummy. The SATA interface must face the HDD dummy rear.
To Next Page
Loading...
