HIKVISION DS-81 Series User Manual

Storage System User Manual
54
Figure 6. 16 Add Backup HYBRID SAN
2. Enter the backup HYBRID SAN IP address.
3. Click OK to add.
4. Optionally, you can check the checkboxes of Synchronization and Delete the videos saved in backup
HYBRID SAN after synchronization succeeded, and click Modify to enable them.
 Synchronization: Once master HYBRID SAN recovers to normal, backup HYBRID SAN uploads the
videos back to master HYBRID SAN .
 Delete the videos saved in backup HYBRID SAN after synchronization succeeded: Delete the videos
in backup HYBRID SAN once they are uploaded to master HYBRID SAN .
Figure 6. 17 Backup HYBRID SAN
6.4.2 Deleting Backup HYBRID SAN
Steps:
1. Check the checkbox of backup HYBRID SAN you want to delete.
2. Click the button and click OK in confirmation dialog box.
6.4.3 Adding Master HYBRID SAN
Before you start:
1. Log into backup HYBRID SAN and enter N+1 Management interface.
2. Add the same encoding devices in backup HYBRID SAN , which have been added in master HYBRID SAN . For
details, refer to chapter 7.3.2 Adding Encoding Device. Ensure the name of encoding devices from different
backup HYBRID SAN s varies from each other.
3. Delete the added encoding devices in step 2.
4. Add schedules for encoding devices in backup HYBRID SAN the same as schedule in master HYBRID SAN .
Steps:
1. Click the Add Master HYBRID SAN button.

HIKVISION DS-81 Series Specifications

General

Brand	HIKVISION
Model	DS-81 Series
Category	Storage
Language	English