Storage System User Manual
55
Figure 6. 18 Add Master HYBRID SAN
2. Enter master HYBRID SAN IP address.
3. Click OK to add. The added master HYBRID SAN is listed in HYBRID SAN master list
4. Enter Maximum Taking Over Number and click Modify. If maximum taken-over master HYBRID SAN is 4
and 7 master HYBRID SAN s are added, when 5 master HYBRID SAN s are abnormal, the backup HYBRID SAN
would take over the first added 4 master HYBRID SAN s. After one or more of the 4 HYBRID SAN s recovers,
other master HYBRID SAN s would be taken over.
The max. taken-over number cannot be more than 10. If input 0 or input nothing, system regards it as 10.
Table 6. 4 Backup HYBRID SAN Status
When master HYBRID SAN is abnormal, backup HYBRID SAN takes over the tasks.
Now backup HYBRID SAN status is working and master HYBRID SAN status is
taken-over. When master HYBRID SAN recovers, backup HYBRID SAN recovers to
standby.
To Next Page
Loading...
