HIKVISION DS-81 Series - Resetting HYBRID SAN

Storage System User Manual
47
Figure 6. 6 Created Prviate Volume
Table 6. 2 HYBRID SAN Status Description
Status
Description
Not configured or incomplete
HYBRID SAN is not configured.
Running
HYBRID SAN is correctly started.
Stopped
Click Stop HYBRID SAN to stop HYBRID SAN service. Once HYBRID SAN
is stopped, you are not able to view encoder information and videos. You
can click Start HYBRID SAN to recover to Running status.
Running and Recovering
Indicators HYBRID SAN is working normally and in automatic recovery
process.
Stopped and Recovering
Indicators HYBRID SAN is stopped and in automatic recovery process.
6.2.2 Resetting HYBRID SAN
Purpose:
You can delete HYBRID SAN videos, encoders, and other configurations by resetting HYBRID SAN . After reset,
HYBRID SAN status restores to not configured or incomplete.
Steps:
1. Enter HYBRID SAN configuration menu.
Figure 6. 7 Reset HYBRID SAN