HIKVISION DS-81 Series User Manual

Storage System User Manual
81
Figure 8. 6 Add Route
2. Input Route IP Address, Subnet Mask, and Default Gateway.
The client server within Route IP address can access the storage system via the Default Gateway.
3. Select Bound data Network Interface in the dropdown list.
4. Click OK to add the route. Thus the client server within 10.128.50.1 to 10.128.50.55 can access the storage
system via the bound network interface 1 whose the gateway is 192.168.0.2.
8.1.4 MAC and IP Bonding
Purpose:
Only client with the specified MAC address and IP address is allowed to get access to iSCSI HDD.
Steps:
1. Click MAC&IP Bonding.
Figure 8. 7 MAC&IP Bonding
2. Input target Client IP Address and MAC Address.
Ensure the client IP is in the same network segment with the storage system.
3. Click OK and click OK in pop up confirmation box to create bond.
8.1.5 Advanced Parameters
Purpose:

HIKVISION DS-81 Series Specifications

General

Brand	HIKVISION
Model	DS-81 Series
Category	Storage
Language	English