Storage System User Manual
67
Uploading schedule can judge whether video loss happens during record schedule. Configure the uploading
schedule to upload the videos saved in encoding devices back to HYBRID SAN .
Before you start:
Ensure pulling back data from encoding device in schedule options is selected when configuring basic or advanced
schedule. For detailed steps, refer to chapter 7.5.1.2 Simple Record Plan and chapter 7.5.1.3 Advanced .
Steps:
1. Click Add Upload Plan.
2. Enter the encoding device name and click OK to select the encoding device. Repeat the step to add more.
Or select encoding devices or groups in the list.
Figure 7. 22 Select Encoding Devices
6. Select the date on which you want to set schedule.
7. In Upload mode, to schedule an all-day uploading, check the checkbox of All-day Upload.
Or you can select the one or more time segments to set start time and end time.
Up to 8 periods can be configured for each day. And the time periods can’t be overlapped with each other.
8. Click OK to add the schedule. Then selected encoding devices only upload videos during the set data and
time segments.
7.5.3 Alarm
Purpose:
You can set the recording time for alarm events.
Before you start:
Enable alarm events you want to pay attention in encoding devices first. For details, refer to user manual of
encoding device.
Steps:
1. Click Strategy and Alarm in navigation bar and choose Alarm.
To Next Page
Loading...
Need help?
General
