HIKVISION DS-81 Series User Manual

Storage System User Manual
79
8.1 Network
Purpose:
The storage system provides one management network interface and two data network interfaces. The
management network interface is designed for configuring the data network interface and device maintenance.
The data network interfaces are used to transmit data.
Step:
Click System in navigation bar and choose Network.
Figure 8. 3 Network
8.1.1 Modifying Data Network Interface
Steps:
1. Check the checkbox of data network interface.
2. Click in Basic Network Interface list.
3. Enter the new IP Address and Subnet Mask and select MTU in dropdown list.
MTU (Maximum Transmission Unit): Select MTU as larger than 1500 byte for the purpose of improving
transmission performance.
4. Click OK to save the settings.
8.1.2 Binding Network Interfaces
Purpose:
When transmitting data via a single data network interface, once the data network interface fails, data
transmission stops. By bonding multiple data network interfaces into one, they can share one IP address, thus to
balance network load and create redundant links. When transmitting data via a bound network interface, once a
data network interface fails, other data network interfaces take over the transmission task.
 The management network interface does not support bond.
 The IP addresss of bound network interface is the same as the first data network interface.
Before you start:

HIKVISION DS-81 Series Specifications

General

Brand	HIKVISION
Model	DS-81 Series
Category	Storage
Language	English