HIKVISION DS-81 Series User Manual

Storage System User Manual
59
stream requirement for the encoding device. If selected, the encoding device Attribute marks as P.
 ANR (Automatic Network Replenishment): When the storage system disconnects with the encoding
device, the encoding device records video and stores in its own storage device, like SD card. Once
connection recovers, encoding device sends the video to the storage system. If selected, the encoding
device Attribute marks as T.
 Enable sub-stream to preview and record: If selected, when you preview and record via sub-stream, it
takes lower bandwidth. But sub-stream video quality and bitrate is lower than main stream. And the
encoding device Attribute would mark as S. If record strategy exists, HYBRID SAN gets stream
according to strategy.
 Enable Arming: If selected, when alarm occurs to encoding device, HYBRID SAN can trigger alarm
record. And the encoding device Attribute would mark as A.
6. Select related record volume in Link to Record Volume.
7. Click OK and click OK in confirmation dialog box to add the encoding device.
Figure 7. 6 Add Encoding Device
 Repeat above steps to add more encoding devices. Up to 1024 encoding devices can be added.
 If the encoding device you add isn’t in the List of Compatible of Encoding Device, the Attribute would mark
as B. You can ask technical support for the List of Compatible of Encoding Device.
7.3.3 Modifying and Deleting
Steps:
 To delete encoding devices, do following steps:
1. Check the checkbox of encoding device you want to delete.
2. Click Delete encoding device.

HIKVISION DS-81 Series Specifications

General

Brand	HIKVISION
Model	DS-81 Series
Category	Storage
Language	English