HIKVISION DS-AT1000S Series - Format Storage Space; Activate Hybrid SAN Sub-System

DS-AT1000S Series Storage System Quick Start Guide
23
Figure 5-1 Wizard
The configuration process takes a certain time. The following prompt will pop up after
configuration finishes.
Figure 5-2 Prompt
5.2 Format Storage Space
5.2.1 Activate Hybrid SAN Sub-System
Purpose
You can only use Internet Explorer 8.0 and above to visit Hybrid SAN sub-system.
Step 1 Visit http://IP address of bond network interface 1 in web browser to access Hybrid SAN
sub-system.
Step 2 Create password for Hybrid SAN sub-system and confirm it.