EasyManuals Logo

HIKVISION DS-C30S-S11 Quick Start Guide

HIKVISION DS-C30S-S11
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Video Wall Controller Quick Start Guide
14
Secure the Service Board to the Slot
Install the Device in the Rack
The device is designed according to 8 U standard rack architecture. The front weight and rear
weight of the device are inconsistent. Lift the device with cautious.
Prepare the rack and rack bracket by yourself.
Verify that the rack is reliably grounded and is stable.
Install a rack bracket on an empty slot of the rack and secure the rack bracket by screws.
Make sure the rack bracket can support the device.
Place the 8 U device on the bracket and use the fixed screws to secure the mounting
brackets to the fixing grooves on both sides of the rack.

Other manuals for HIKVISION DS-C30S-S11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-C30S-S11 and is the answer not in the manual?

HIKVISION DS-C30S-S11 Specifications

General IconGeneral
BrandHIKVISION
ModelDS-C30S-S11
CategoryController
LanguageEnglish

Related product manuals