HIKVISION DS-E00HGHI-B Series - Ports (more Settings)

Figure 6-8 Two-Way Authencaon
2.
Install the CA cercate in CA Cercate.
3.
Click Create in Client Cercate, and follow the pop-up to create the cercate.
4.
Click Download to download the cercate le to a desired locaon.
5.
Upload the downloaded cercate le to the server, and the server will return the cercate
key.
6.
Open the cercate as a text le, and modify it by the cercate key as the server returned.
7.
Install the modied cercate in Client Cercate.
8.
Oponal: Click Test to test if the connecon is valid.
9.
Click Save.
6.2.8 Ports (More
Sengs)
Set dierent port types to enable relevant funcons as your desire.
Go to Conguraon → Network → General → More Sengs .
Alarm Host IP/Port
The device will send the alarm event or
excepon message to the alarm host when an alarm is
triggered. The remote alarm host must have the client management system (CMS) soware
installed.
Digital Video Recorder User Manual
46