HIKVISION DS-E00HGHI-B Series - Page 86

Range [1s-10s], the threshold for the me of the object loitering in the region. When the
duraon of the object in the dened detecon area is longer than the set me, the alarm
will be triggered.
3)
Oponal: Set Detecon Target as Human or Vehicle to discard alarms which are not triggered
by human body or vehicle.
Note
This funcon is only available for certain models.
4) Click Max. Size and draw a quadrilateral in the preview window to set the maximum draw
area size of the target.
5) Click Min. Size and draw a quadrilateral in the preview window to set the minimum draw area
size of the target.
6) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of
the
detecon region.
5.
Set the arming schedule. Refer to Congure Arming Schedule for details.
6.
Set the linkage
acons. Refer to Congure Alarm Linkage Acon for details.
7.
Click Apply.
Region Entrance
Detecon
For certain network cameras, region entrance detecon funcon detects people, vehicles or other
objects which enter a pre-dened virtual region from the outside place, and some certain acons
can be taken when the alarm is triggered.
Steps
1.
Go to
Conguraon → Event → Smart Event → Region Entrance .
2.
Set Camera.
3.
Turn on Enable.
4.
Oponal: Check Save VCA Picture to save the captured pictures of VCA detecon.
5.
Set the detecon rules and detecon areas.
1) Set Arming Area. Up to 4 arming areas are selectable.
2) Adjust
Sensivity. Sensivity: Range [0-100]. The higher the value is, the more easily the
detecon alarm can be triggered.
3) Oponal: Set Target Detecon as Human or Vehicle to discard alarms which are not triggered
by human body or vehicle.
Note
This funcon is only available for certain models.
4) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of
the detecon region.
6.
Set the arming schedule. Refer to
Congure Arming Schedule for details.
7.
Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
8.
Click Apply.
Digital Video Recorder User Manual
62