HIKVISION DS-K1101MK User Manual

DS-K1100 Series Card Reader
vii
reader, you must use RVVP cable above 0.5 to connect them.
 If the card reader is installed outside or in environment easy to
permeable, it is advisable to install a waterproof shield.
 If you need to install several card readers, the distance among them
must over 30cm.
 To reduce the noise in long distance transmission, the shield of cable
should connect to the GND of both controller and card reader
terminal.

HIKVISION DS-K1101MK Specifications

General

Type	Basic access control reader
Certification	FCC, CE
Product color	Black
Housing material	Acrylonitrile butadiene styrene (ABS)
Keypad integrated	Yes
Access code reader	No
Authentication type	Access chip/card, Password
Keypad number of keys	12
International Protection (IP) code	IP64
PC connected	-
DC voltage range	12 - 12 V
Power consumption	500 mA
Operating temperature (T-T)	-20 - 65 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	92.3 mm
Width	132 mm
Height	20.5 mm
Weight	140 g