HIKVISION DS-K1103MK User Manual

DS-K1100 Series Card Reader
vii
reader, you must use RVVP cable above 0.5 to connect them.
 If the card reader is installed outside or in environment easy to
permeable, it is advisable to install a waterproof shield.
 If you need to install several card readers, the distance among them
must over 30cm.
 To reduce the noise in long distance transmission, the shield of cable
should connect to the GND of both controller and card reader
terminal.

HIKVISION DS-K1103MK Specifications

General

UN number	-
Front camera	No
RS-485 ports	1
Type	Basic access control reader
Certification	FCC, CE
Product color	Black, Grey
LED indicators	Status
RFID frequency	13.56 MHz
Housing material	Acrylonitrile butadiene styrene (ABS), Polycarbonate (PC)
Access code reader	Yes
Authentication type	Access chip/card
Keypad number of keys	12
Access chip/card reader type	Contactless
Contactless working distance	50 mm
International Protection (IP) code	IP64
Operating temperature (T-T)	-20 - 65 °C
Operating relative humidity (H-H)	10 - 90 %
Input voltage	12 V
Power consumption	500 mA
Power consumption (typical)	2 W

Weight and Dimensions

Depth	14.7 mm
Width	76 mm
Height	129 mm
Weight	150 g