HIKVISION DS-K1T342MX

Note
If you change the device type, you should reboot the device.
Floor No.
Set the device installed oor No.
Door Staon No.
Set the device installed oor No.
Note
If you change the No., you should reboot the device.
If you set the device type as Outer Door Staon, you can set the outer door staon No.
Figure 8-11 Device ID Sengs (Outer Door Staon)
Outer Door Staon No.
If you select outer door staon as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Congure SIP Parameters
Set the device's IP address and the SIP server's IP address. Aer seng the parameters, you can
communicate among the access control device, door staon, indoor staon, main staon, and the
plaorm.
DS-K1T342 Series Face Recognion Terminal User Manual
109