HIKVISION DS-K1T342MX

Set the matching threshold when authencang via ECO mode 1:N matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejecon rate. The maximum
value is 100.
Set Recognion Area
Tap Conguraon → Smart → Area Conguraon to enter the page.
Drag the blue frame in the live video to adjust the recognion area. Only the face within the area
can be recognized by the system.
Drag the slider to congure the eecve area of face recognion.
Tap Save to save the sengs.
8.4.7 Video Intercom Sengs
Set Device ID
The device can be used as a door staon, outer door staon, or access control device. You should
set the device ID before usage.
Device ID Sengs
Tap Conguraon → Intercom → Device ID Sengs .
If you set the device type as Door Staon or Access Control Device, you can set the oor No. and
door staon No.
Tap Save to save the sengs aer the conguraon.
Figure 8-10 Device ID Sengs (Door Staon)
Device Type
The device can be used as a door staon, outer door staon, or access control device. Select a
device type from the drop-down list.
DS-K1T342 Series Face Recognion Terminal User Manual
108