HIKVISION DS-K1T342MX

9.5.14 Customize Audio Content
Customize the output audio content when authencaon succeeded and failed.
Steps
1.
Click Conguraon → Video/Audio → Prompt .
Figure 9-8 Customize Audio Content
2.
Select Prompt as TTS(Text to Speech) to turn the text to audio content.
3.
Or you can select Prompt as Custom Prompt Imporng.
1) Select Custom Type or you can import your custom prompt from local PC.
2) You can view the imporng status of the custom prompts in the list.
Note
The audio le shall be in WAV format and mono, and the sampling rate shall be 8 K or 16 K. The
amplitude of the audio le shall not exceed -3dB, and the size of the audio le size shall not
exceed 512 K.
4.
Select me schedule.
5.
Enable the funcon.
6.
Set the appellaon.
7.
Set the me period when authencaon succeeded.
1) Click Add.
2) Set the me duraon and the language.
DS-K1T342 Series Face Recognion Terminal User Manual
131