HIKVISION DS-K2801

Access Controller·User Manual
59
6. Click Save button to save parameters.
7.8.3 Open Door with First Card
Purpose:
You can set multiple first cards for one access control point. After the first card swiping, it allows
multiple persons access the door or other authentication actions. The first card mode contains
Remain Open with First Card, Disable Remain Open with First Card, and First Card Authorization.
Remain Open with First Card: The door remains open for the configured time duration after the
first card swiping until the remain open duration ends.
First Card Authorization: All authentications, except for the authentications of super card, duress
card, and duress code, are allowed only after the first card authorization.
Steps:
1. Click Open Door with First Card tab to enter the following interface.
2. Select an access control device from the list on the left.