EasyManuals Logo

HIKVISION DS-K2801 User Manual

HIKVISION DS-K2801
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
Access Controller·User Manual
62
7.8.5 Authentication Password
Purpose:
You can open the door by inputting the authentication password on the card reader keypad after
finishing the operation of setting authentication password.
Notes:
This authentication password function is only valid during the schedules when the card reader
authentication mode for the access control device is set as Card or Authentication Password.
For details, please refer to Chapter 7.8.2 Card Reader Authentication.
This function should be supported by the access control device.
Steps:
1. Click Authentication Password tab and select an access control device from the list.
All the cards and persons which have been applied to the device will be displayed.
Note: For setting and applying the permissions to the device, refer to Chapter 7.7 Permission
Configuration.
2. Click the Password field of the card and input the authentication password for the card.
Note: The authentication password should contain 4 to 8 digits.
3. After setting the authentication password, the authentication password function of the card
will be enabled by default.
4. (Optional) You can input the keywords of card No., person name, or authentication password to
search.
Notes:
Up to 500 cards with authentication password can be added to one access control device.
The password should be unique and cannot be the same with super password, duress code,
and dismiss code in the access control parameters.
7.8.6 Custom Wiegand
Purpose:
Based on the knowledge of uploading rule for the third party wiegand, you can set multiple
customized wiegand protocols to communicate between the controller and the third party card
readers.
Before you start:
Wire the third party card readers to the controller.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K2801 and is the answer not in the manual?

HIKVISION DS-K2801 Specifications

General IconGeneral
Product typeAccess controller
CertificationCE, FCC
CompatibilityWiegand
Mounting typeWall
Product colorBlack
Brand compatibilityHikvision
Operating temperature (T-T)-20 - 65 °C
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth285 mm
Width237 mm
Height69 mm

Related product manuals