HIKVISION DS-K5032-D User Manual

Table 7-1 Basic Parameters
Parameter Descripon
Visitor Parameters
Sengs
Set visitor parameters. Refer to Set Visitor Parameters for details.
Change Password Enter old password and conrm new password.
The password here is the acvaon password.
Volume Adjust the voice volume ranging from 0 to 10. The larger the value, the
louder the volume.
Supplement Light Set the white or IR supplement light's brightness. The brightness ranges
from 0 to 100.
Person and ID
Comparison Threshold
Set the threshold for person and ID comparison. The larger the value is,
the smaller the false accept rate and the larger the false rejecon rate.
Face An-Spoong
Detecon
If enabling the funcon, the device can recognize whether the person is
a live one or not.
Face Liveliness Level Aer enabling face an-spoong funcon, you can set the matching
security level when performing live face authencaon. note: Biometric
recognion products are not 100% applicable to an-spoong
environments. If you require a higher security level, use mulple
authencaon
modes.
Visitor Reservaon Enable the funcon to allow check-in via visitor code or the last 4 digits
of the phone number.
Synchronize Visitor
Informaon
Enable the funcon to synchronize visitor informaon of the devices and
the informaon on the plaorm automacally.
Auto Sync. Interval Set the interval for visitor informaon auto synchronizing ranging from 5
to 60.
Face Rang Enable the funcon to rate the face recognion.
Face Rang Threshold Set the threshold for face rang. The larger the value is, the beer the
face picture quality is.
Language Sengs Set the device language.
Time Sengs Set the device me.
Set Visitor Parameters
You can enable the funcons for visitor check-in.
DS-K5032 Series Visitor Terminal User Manual
27

HIKVISION DS-K5032-D Specifications

General

Brand	HIKVISION
Model	DS-K5032-D
Category	Touch terminals
Language	English