HIKVISION DS-K5032-D User Manual

2.
Tap Export Captured Picture or Export Visitor Records to export the picture captured or visitor
informaon recorded on the device to your USB ash drive.
System Maintenance
You can view the device system informaon, restore the system to factory sengs or default
sengs, reboot the device, exit the system and start wizard.
Tap in the top right corner of the home page. Tap Sengs → System Maintenance .
Figure 7-27 Maintenance Page
Soware Upgrading
Plug the USB ash drive in the device USB interface.
●
Tap Upgrade → OK , and choose the
le with the extension of zip in the USB ash drive for
the device to read and start system upgrading.
●
Tap Upgrade Component → OK , and choose the
le with the extension of dav in the USB
ash drive for the device to read and start component upgrading.
Restore to Factory Sengs
All parameters will be restored to the factory sengs. The system will reboot to take eect.
Restore to Default Sengs
All parameters, except for the communicaon sengs, remotely imported user informaon, will
be restored to the default sengs. The system will reboot to take eect.
DS-K5032 Series Visitor Terminal User Manual
46

HIKVISION DS-K5032-D Specifications

General

Brand	HIKVISION
Model	DS-K5032-D
Category	Touch terminals
Language	English