Saving Visitor Records
When the funcon is enabled, visitor informaon will be recorded for the rst-me visit. When
revisits, the visitor only need to present his/her
credenal for the device to read and the
informaon will be displayed on screen.
Auto Check Out
When the funcon is enabled, system will check out all visitors at 24 o'clock every day.
Visitor Code Length
You can set the visitor code length of 4 or 6 digits.
Export Data
You can export captured picture or visitor records to your USB ash drive.
Before You Start
Plug in the USB ash drive.
Note
The supported USB ash drive format is FAT32. Make sure the spare space is larger then 512 M.
Steps
1.
Tap in the top right corner of the home page. Tap Data Management to enter the page.
Figure 7-26 Data Management
DS-K5032 Series Visitor Terminal User Manual
45
To Next Page
Loading...
Need help?
General
