Figure 6-14 Backlight
1) Check to enable BLC.
2) Select BLC Area.
6. Click Save to enable the
sengs.
OSD Sengs
You can customize the camera name, me/date format on the
live view.
Steps
1. Click Image → OSD to enter the
sengs page.
Figure 6-15 OSD
2. Check to enable Display Name, Display Date or Display Week
at your actual needs.
3. Edit the Camera Name.
Note
You can edit the camera name only when Display Name is
enabled.
4. Select from the drop-down list to set the Time Format and
Date Format.
5. Click Save to enable the sengs.
Target Cropping
Steps
1. Click Image → Crop to enter the page.
2. Check Enable Target Cropping to enable the funcon.
3.
Click
to capture photo.
4.
Click to start recording.
5. Select Cropping Resoluon.
6. Click Save.
46
To Next Page
Loading...
Need help?
General
