HIKVISION DS-KD-DIS User Manual

Figure 6-22 Add Password
Set password and remarks and click to enable electric lock.
Click Save to save the sengs.
Time Parameters
Go to Intercom → Time Parameters to enter the page.
Congure Max. Call Duraon, Max. Message Duraon, Max.
Ring Duraon, and click Save.
Note
●
Max. call duraon between the module indoor staon and
client ranges from 90 s to 120 s. The call will end automacally
when the actual calling duraon is longer than the congured
one.
●
Max. message duraon ranges from 30 s to 60 s. The message
will end automacally when the actual message duraon is
longer than the congured one.
●
Max. ring duraon refers to the maximum duraon of the
module indoor
staon when it is called without being
accepted. Max. ring duraon ranges from 65 s to 255 s.
Ring-Back Tone Sengs
Click Intercom → Ringbacktone Sengs to enter the sengs
page.
Click Add to select the ring tone from PC.
Note
Available Audio Format: WAV、AAC, Size: Less than 600 KB,
Sample Rate: 8000Hz, Mono.
Press Buon to Call
Steps
1. Go to Intercom → Press Buon to Call to enter the sengs
page.
2. Select Main Unit or Sub Module as the buon call target.
Note
If you select Main Unit, you should congure Buon Sengs
and select Link Time Schedule as Template Plan 1 or Enable
Indoor Staon All Day by Default.
3. Click Save to enable the sengs.
I/O Sengs
Steps
1. Click Intercom → I/O
Sengs to enter the I/O input and
output sengs page.
2. Select I/O input No., input mode, output No., and output
mode.
51

HIKVISION DS-KD-DIS Specifications

General

Brand	HIKVISION
Model	DS-KD-DIS
Category	Intercom System
Language	English