HIKVISION DS-KD3002-VM - Edit Network Parameters

Video Intercom Door Station·Quick Start Guide
28
4.3 Edit Network Parameters
Purpose:
Network connection is mandatory for the use of door station.
Steps:
5. Go to the configuration mode.
1) Hold down the * key and the # key for 2s to enter the admin password page.
2) Enter the admin password, and press the # key.
Figure 4-3 Admin Password Page
The default admin password is 888999.
6. Enter the network parameters settings page.
1) Press the numeric keys 4 and 6 to switch to the network configuration page.
Figure 4-4 Network Configuration Page
2) Press the # key to enter the network parameters settings page.
With the private SIP protocol, you should set IP address, sub mask, gateway, SIP IP,
main IP, and center IP for the door station.