EasyManuals Logo
Home>HIKVISION>Intercom System>DS-KH6310-W

HIKVISION DS-KH6310-W User Manual

HIKVISION DS-KH6310-W
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
Video Intercom Indoor Station·User Manual
48
After editing the local network parameters of device, you should add the devices to
the device list again.
Linked Devices Network Configuration
Purpose:
In the linked devices network configuration interface, you can configure the network
parameters of master stations, SIP servers and management centers of the same LAN.
The devices can be linked to the door station and realize the linkage between these
devices.
Steps:
1. Click the Linked Network Configuration button to enter linked network configuration
interface.
Figure 8-37 Linked Devices Network Configuration Interface (Indoor Station)
Figure 8-38 Linked Devices Network Configuration Interface (Indoor Extension)
2. Select the main door station type from the drop-down list: Indoor Station or Indoor
Extension.
Indoor Station: Enter the master station IP address, (main) door station IP address, SIP
server IP address, management center IP address, and doorphone IP
address.
Indoor Extension: Enter the IP address of main indoor station.
3. Select the connection mode from the drop-down list menu: Same LAN, or Different
LANs.
4. Click the Apply button to enable the settings.

Table of Contents

Other manuals for HIKVISION DS-KH6310-W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KH6310-W and is the answer not in the manual?

HIKVISION DS-KH6310-W Specifications

General IconGeneral
ColorYes
CertificationFCC, IC, CE, C-TICK, ROHS, REACH, WEEE
Number of buttons4 buttons
Connectivity technologyWired
Sustainability certificatesRoHS
Voice codecsG.711u
Display diagonal7 \
Display resolution800 x 480 pixels
Display technologyLCD/TFT
Indoor unit power typeAC/DC
Power consumption (typical)10 W
Operating relative humidity (H-H)10 - 90 %
Main monitor station operating temperature (T-T)-10 - 55 °C
Proper useIndoor
Control typeButtons, Touch
Product colorWhite
Operating system installedLinux
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
Ethernet LAN (RJ-45) ports1
Supported network protocolsTCP/IP, RTSP
Weight and Dimensions IconWeight and Dimensions
Depth26 mm
Width217 mm
Height142 mm

Related product manuals